FREE SHIPPING ON ALL SUNBRELLA SHADE SAILS
Sunbrella Standard Right Angle Triangle Shade Sails can have two sides that are the same length that forms a right angle or the right angle can come from two different lengths. They are perfect for attaching to an inside corner of a house or building. They can also be combined with square, rectangular, and other triangular shade sails to create distinctive designs. We keep in stock 9 of the most popular colors and we also offer 5 special order colors for an additional cost and it will add an extra week to the lead time of manufacturing the shade sail using special order colors. Sunbrella® Shade Sails will give you maximal protection from the heat and UV’s from the sun. This state of the art fabric is unaffected by moisture and natural temperatures. Sunbrella’s solution dyed acrylic fabric is fade and water resistant. The near waterproof fabric also resists stains, mildew and rot. Since they are water resistant, you not only get protection from the sun, but also protection from when it rains or snows.
At Least 20° Slope Required for Water Run Off |
|
Shade Sail Size |
Amount of Drop |
10 Ft | 3 Ft 7 In |
12 Ft | 4 Ft 4 In |
14 Ft | 5 Ft 0 In |
16 Ft | 5 Ft 8 In |
18 Ft | 6 Ft 4 In |
20 Ft | 7 Ft 0 In |
22 Ft | 7 Ft 10 In |
24 Ft | 8 Ft 10 In |
25 Ft | 9 Ft 4 In |
A 20° Slope is about a 35% difference of the high and low mounting points |
Sunbrella fabric is water resistant, and shade sails made from this fabric have to be installed with at least a 20 degree slope to allow water to run off and not pool on top of the sail. The chart above lists measurements for the amount of vertical drop recommended based on the size of the sail. Measurements are rounded. Additionally, the perimeter of each sail is designed with a gentle curve inwards towards the center of the sail to control fabric tension. This inward curve will be approximately 6-8% of the length of each side of the shade sail. Therefore, when tension is placed on the shade sail, the fabric will not wrinkle or sag. Shade sails, when installed properly, do not sag or flap in the wind.
When calculating the size of the shade sail that you would need for a certain area, be sure to allow for about 12 to 18 inches of space between the shade sail’s d-rings and the mounting points for the necessary mounting hardware including turnbuckles. It is better for the shade sail to be too small than too large. If it is too large, you will not be able to tighten when necessary, but if they are too small, you can still attach the sail to the mounting points with the help of a few lengths of chain or a piece of aircraft cable.
Note: 1) Due to the available Sunbrella fabric widths, and depending on the size ordered, your shade sail may have seams. 2) Due to manufacturing tolerances and fabric stretch, finished shade sail dimensions may vary 1.5″ +/-.
All standard size Sunbrella right angle triangle shade sails are made to order. Therefore, all sales are final. No returns or refunds will be accepted. Orders cannot be changed or cancelled after 1 business day from the time the order was placed.
Features & Benefits of the Sunbrella Shade Sails | |
---|---|
|
|
Need a custom shade sail – Click this link |
Custom Shade Sail Quote Form |
Sunbrella® Stock Colors Click to Enlarge | |||
---|---|---|---|
Terra-Cotta 4622 |
Mohave Sand 4628 |
Forest Green 4637 |
Pacific Blue 4601 |
Natural White 4604 |
Taupe 4648 |
Jockey Red 4603 |
Beige 4620 |
Sunflower Yellow 4602 |
Sunbrella® Special Order Colors Click to Enlarge *Special Order Colors have an additional charge and longer delivery times* | ||
---|---|---|
*Navy* 4626 |
*Aquamarine* 4623 |
*Black* 4608 |
*Tuscan* 4677 |
*Turquoise* 4610 |
*Special order colors have an additional charge and longer delivery times.*
Reviews
There are no reviews yet.