Sunbrella Rectangle Shade Sails

FREE SHIPPING ON ALL SUNBRELLA SHADE SAILS

Sunbrella Standard Rectangle Shade Sails are longer than the square shade sails, which can be used for covering patios and they are great for cars, boats, campers and RVs. They can be used to cover baseball dugouts and even animal shelter exercise areas. We keep in stock 9 of the most popular colors and we also offer 5 special order colors for an additional cost and it will add an extra week to the lead time of manufacturing the shade sail using special order colors.

Sunbrella fabric is water resistant, and shade sails made from this fabric have to be installed with at least a 20 degree slope to allow water to run off and not pool on top of the sail. The chart below lists measurements for the amount of vertical drop recommended based on the size of the sail. Measurements are rounded.

Additionally, the perimeter of each sail is designed with a gentle curve inwards towards the center of the sail to control fabric tension. This inward curve will be approximately 6-8% of the length of each side of the shade sail. Therefore, when tension is placed on the shade sail, the fabric will not wrinkle or sag. Shade sails, when installed properly, do not sag or flap in the wind. When calculating the size of the shade sail that you would need for a certain area, be sure to allow for about 12 to 18 inches of space between the shade sail’s d-rings and the mounting points for the necessary mounting hardware including turnbuckles. It is better for the shade sail to be too small than too large. If it is too large, you will not be able to tighten when necessary, but if they are too small, you can still attach the sail to the mounting points with the help of a few lengths of chain or a piece of aircraft cable.

Note: 1) Due to the available Sunbrella fabric widths, and depending on the size ordered, your shade sail may have seams. 2) Due to manufacturing tolerances and fabric stretch, finished shade sail dimensions may vary 1.5″ +/-.

All standard size Sunbrella Rectangle Shade Sails are made to order. Therefore, all sales are final. No returns or refunds will be accepted. Orders cannot be changed or cancelled after 1 business day from the time the order was placed.

Sunbrella® Stock Colors Click to Enlarge
Terra-Cotta 4622	Mohave Sand 4628	Forest Green 4637	Pacific Blue 4601
Natural White 4604	Taupe 4648	Jockey Red 4603	Beige 4620
Sunflower Yellow 4602

Sunbrella® Special Order Colors Click to Enlarge *Special Order Colors have an additional charge and longer delivery times*
*Navy* 4626	*Aquamarine* 4623	*Black* 4608
*Tuscan* 4677	*Turquoise* 4610

*Special order colors have an additional charge and longer delivery times.*

Available Webbing	Name	Description
	Residential sail with 1-1/2 inch UV webbing	For residential use in sails up to about 325 square feet. 1-1/2 inch webbing is rated at an 1800 pound break strength. Starting at $5.57 per square foot
	Heavy residential/light commercial sail with 2 inch webbing	For commercial applications and larger residential use in sails from 325 to 500 square feet. 2 inch webbing is rated at a 5,500 pound break strength. Starting at $6.24 per square foot
	Light commercial sail with 1/8 inch steel cable reinforcement	For commercial and residential applications where a steel cable is required. For use in sails up to 325 square feet. 1/8 inch cable has a 400 pound work load strength and a 2,000 pound break strength. Starting at $6.93 per square foot
	Commercial sail with 1/4 inch steel cable reinforcement	For large commercial and residential applications where a steel cable is required.. For use in sails over 325 square feet. 1/4 inch cable has a 1,400 pound work load and a 6,000 pound break strength. Starting at $7.66 per square foot